Pultrusion Machines
Pulforce Lab 0804-5000
- Working window of 8” wide x 4” High
- Die station: Fixed non-moveable
- Cooling table: None
- Dual Automatic Reciprocating pullers
- Max pulling force: 2-1/2 Ton (5000#)
- Max Pull speed: 120 in/min
- Three zone integrated heater control package
- Electric Supply: 460/480 3-Ph 60Hz
- Hydaulic Cooling: None
- Operator controls: All in one compact touch screen controller
Pulforce 0804-8000
- Nominal Working Window of 8” wide x 4” High
- Die Station: Fixed non-moveable
- Cooling Run out table: 8/ft long
- Dual Automatic Reciprocating Pullers
- Max Pulling force: 4 Ton (8000#)
- Max Pull Speed: 120 in/min
- Pull Speed Regulation: Proportional Hydraulic Velocity Control
- Maximum Clamping Force: 4 Ton (8000#)
- Saw Type: Up Cut – Flying Cut off design
- Manual Selectable Saw Cut-off
- Three zone integrated heater control package
- Electrical supply: 460/480 3-Ph 60 Hz
- Hydraulic system Cooling: Water heat Exchanger
- Operator Controls: All in one graphics controller
Pulforce 3210
- Nominal Working window of 32” wide x 10” High
- Die Station: Moveable
- Cooling Run out table: 15/ft long
- Dual Automatic Reciprocating Pullers
- Max Pulling Force: 15 Tons (30,000#)
- Max Pull Speed: 60 in/min
- Pull Speed Regulation: Hydraulic Pressure and Temperature compensated flow control
- Maximum Clamping Force: 15 Tons (30,000lbs) over 4 cylinders per head (equalized force)
- Saw type: Automatic Overhead/Crossing with auto cut-off selectable by encoder or paddle switch
- Three zone integrated heater control package
- Electrical supply: 460/480 3-Ph 60 Hz
- Hydraulic System Cooling: Water Heat Exchanger
- Operator Controls: All in one graphics controller
Pulforce 5012
- Nominal Working window of 50” wide x 12” High
- Die Station: Moveable
- Cooling Run out table: 15/ft long
- Dual Automatic Reciprocating Pullers
- Max Pulling Force: 15 Tons (30,000#) Also available upto 25 Tons (50,000#)
- Max Pull Speed: 60 in/min
- Pull Speed Regulation: Hydraulic Pressure and Temperature compensated flow control
- Maximum Clamping Force: 15 Tons (30,000lbs) over 4 cylinders per head (equalized force)
- Saw type: Automatic Overhead/Crossing with auto cut-off selectable by encoder or paddle switch
- Three zone integrated heater control package
- Electrical supply: 460/480 3-Ph 60 Hz
- Hydraulic System Cooling: Water Heat Exchanger
- Operator Controls: All in one graphics controller
|
 Pultrusion Line View
 Pultrusion Line Control Station
 Close up pultrusion head
 Close up pultrusion machine saw station
|
